Capsule Tube & 20 Air-Tite 23mm Coin Capsules for 1/4oz Gold Libertads

Capsule Tube & 20 Air-Tite 23mm Coin Capsules for 1/4oz Gold Libertads

COINS THAT FIT: Half Cents 1794 ~ 1857, Two Cent, Bahamas 10 Cents, Barbados 25 Cents (1973 - 2007), One Euro, 20 Marks Gold, 10 New Sheqalim, 1/4 oz. Gold Libertad, and 2 Rubles

DETAILS

• Package Includes: 20 Coin Capsules of your Ring Color Choice and 1 Capsule Tube of your Cap Color Choice
• Capsule Measurements: Inside Diameter 23mm x Depth 2.03mm, Outside Diameter 36.5mm x 5.1mm
• Tube Measurements: Inside Diameter 36.7mm x Height 4-1/4"
• Genuine Air-Tite Holder Brand Capsules are Made in the U.S.A.
• Capsules are shipped Un-Assembled between layers of foam

ABOUT THE PRODUCT

The capsule storage tubes are designed to store Air-Tite Brand coin holders. Choose between a cap or a plug lid. The cap lid closes around the outside of the tube and each lid has a small hole poked in the cap to allow air-flow when removing the lid, and the lid is lubricated for easier use. The plug lid closes inside the tube and does not have an air-flow hole or lubrication. The tubes do not provide any extra protection for the coins, they are only a storage solution.

Capsules are PVC free, archival safe, and are made from an acrylic plastic with a non-yellowing agent. This process results in a product that is hard, crystal clear, and smooth to the touch. Our capsules are securely packaged, un-assembled, within layers of foam to protect them during shipment. The Rings are made of an inert cross linked polyethylene. The rings secure the coin in the holder. They will create an additional barrier against air contamination and also presents an attractive border to accent the coin.

Ring Type holders are recommended for coins with an odd diameter. We recommend sizing down from your coin's diameter, for example a coin that measures 23.5mm would size down to the 23mm Ring Holder. The inner foam ring will stretch to provide a nice snug fit. Please note, sizing down from the coin's diameter will only apply to Ring Type Holders. This technique will not work for the Direct Fit Holders.