Capsule Tube & 20 Air-Tite 21mm Coin Capsules for US Nickels

Capsule Tube & 20 Air-Tite 21mm Coin Capsules for US Nickels

COINS THAT FIT: US Nickels (Liberty, Buffalo, Jefferson), Canadian Five Cents, Napoleon 20 Gold Francs and 10 Reichspfennig

DETAILS

• Package Includes: 20 Coin Capsules of your Ring Color Choice and 1 Capsule Tube of your Cap Color Choice
• Capsule Measurements: Inside Diameter 21mm x 2.03mm Depth, Outside Diameter 36.5mm x 5.1mm Depth
• Tube Measurements: Inside Diameter 35.82mm x Height 4-1/4 inches
• Genuine Air-Tite Holder Brand Capsules are Made in the U.S.A.
• Capsules are shipped Un-Assembled between layers of foam

ABOUT THE PRODUCT

The capsule storage tubes are designed to store Air-Tite Brand coin holders. Choose between a cap or a plug lid. The cap lid closes around the outside of the tube and each lid has a small hole poked in the cap to allow air-flow when removing the lid, and the lid is lubricated for easier use. The plug lid closes inside the tube and does not have an air-flow hole or lubrication. The tubes do not provide any extra protection for the coins, they are only a storage solution.

Capsules are PVC free, archival safe, and are made from an acrylic plastic with a non-yellowing agent. This process results in a product that is hard, crystal clear, and smooth to the touch. Our capsules are securely packaged, un-assembled, within layers of foam to protect them during shipment. The Rings are made of an inert cross linked polyethylene. The rings secure the coin in the holder. They will create an additional barrier against air contamination and also presents an attractive border to accent the coin.

Ring Type holders are recommended for coins with an odd diameter. We recommend sizing down from your coin's diameter, for example a coin that measures 21.5mm would size down to the 21mm Ring Holder. The inner foam ring will stretch to provide a nice snug fit. Please note, sizing down from the coin's diameter will only apply to Ring Type Holders. This technique will not work for the Direct Fit Holders.